Sap level 2

CHAPTER Revision on Level 1 Sap2000

  • Design Beams
  • Design Frames
  • Design Multi-Story
  • Design Trusses


CHAPTER 2 The Analysis of Solid Slabs

  • Design a primary thickness with excel sheet
  • Get a primary straining actions with first principles
  • Define the slab shell
  • Define Area Sections
  • Edit Grids
  • Draw The slab
  • Joint Restrains
  • Load cases
  • Load combinations
  • Assign the loads
  • Mesh The Areas
  • Analyze
  • Straining Actions
  • Stresses
  • Reinforcement ( Mesh and additional )
  • Home work


CHAPTER 3 The Analysis of Paneled Beams

  • Design a primary thickness for each individual slab
  • Get a guide Bending Moment to check the Results ( Manual )
  • Edit Grids
  • Define the ( Slab , Beams )
  • Then Draw the area
  • Load Combination ( Ultimate-Working )
  • Define the girder beams and secondary beams
  • Analyze
  • Stress


Chapter 4 The Analysis of Hollow Blocks

  • Define of the Rips & Blocks & Solid part
  • Define The Main Criteria of Hollow Blocks
  • Edit Grids
  • Define properties of ( slabs & beams )
  • Mesh the Areas
  • Joint Restrains
  • Degree of Freedom
  • Analyze
  • Straining Actions
  • Reinforcement
  • Deflection


Chapter 5 The Analyze of Flat Slab

  • Get a primary thickness of the flat slab
  • Determine the allowable deflection
  • Columns ( required check punching )
  • Edit Grids
  • Define the ( Slabs – Beams )
  • Draw the areas
  • Mesh the areas
  • Check deflection
  • Check punching
  • Load cases – load combination
  • Loads
  • Analyze
  • Stress
  • Reinforcement

    Sap Project

  • 1-Steps of The Project
    • 1.1 Export From AutoCAD
    • 1.2 Statical System
    • 1.3 Define The Frames ( Slabs-Beams)
    • 1.4 Draw the area
    • 1.5 Mesh the area
    • 1.6 Join Restrains
    • 1.7 Load Cases _ Load Combinations
    • 1.8 Assign Loads
    • 1.9 Replicate The Floors
    • 1.10 Analyze
    • 1.11 Export The Columns
    • 1.12 Design The Columns
    • 1.13 Reinforcement
  • 2-Analyze of Raft
    • 2.1 Exports from AutoCAD
    • 2.2 Draw The Raft on Sap 2000
    • 2.3 Put The Springs to check bearing
    • 2.4 Reinforcement the Raft

Chapter 6 Analyze of Stairs (Two flight stair – Three flight stair-Helical Stairs)

  • Define the materials
  • 6.2 Define the frames
  • 6.3 Draw the levels
  • 6.4 Load cases – Load combination
  • 6.5 Loads
  • 6.6 Draw the areas
  • 6.7 Mesh the areas
  • 6.8 Analyze
  • 6.9 Straining Actions
  • 6.10 Reinforcement

Chapter 7 Lateral Loads (Wind Loads – Earth Quake Loads)


Chapter 8 Tanks

  • Edit the grids
  • Define The Frames ( Slabs-Beams)
  • Draw the area
  • Mesh the area
  • Join Restrains
  • Load Cases _ Load Combinations
  • Assign Loads
  • Replicate The Floors
  • Analyze
  • Reinforcement

 



 
Label